دنیای جوشکاری

دنیای جوشکاری

دنیایی از مطالب جوشکاری و بازرسی فنی
دنیای جوشکاری

دنیای جوشکاری

دنیایی از مطالب جوشکاری و بازرسی فنی

جوشکاری اصطکاکی نقطه‌ای آلیاژ آلومنیوم-لیتیم aluminium–lithium 2A97 alloy

Microstructure and mechanical properties of

friction spot welding aluminium–lithium 2A97 alloy

ریزساختار و ویژگی‌های مکانیکی جوشکاری اصطکاکی نقطه‌ای آلیاژ آلومنیوم-لیتیم 2A97

ABSTRACT

In this study, we investigated the microstructure and mechanical properties in different regions of the friction spot welded 2A97 aluminium-lithium alloy subjected to different heat treatment processes. The 2.0. mm thick hot-rolled sheet of 2A97 alloy was successfully welded using friction spot welding method with optimised welding parameters. Afterwards, the as-welded 2A97 joints experienced two subsequent heat treatment procedures: solution and ageing; directly ageing. The corresponding microstructure and mechanical properties of the heat-treated specimens were studied by means of optical microscope (OM), scanning electron microscope (SEM), transmission electron microscope (TEM), hardness test and tensile test. The results show that the mechanical properties of the 2A97 joints before and after heat treatment were significantly modified, which was mainly related to fine-grained microstructure, size and type of precipitates, and dislocation density. Compared to the base material and the material that only experienced direct ageing, the whole friction spot welded 2A97 joint after solution and ageing treatment delivered better mechanical properties.

  

 جهت دانلود رایگان نسخه لاتین این مقاله اینجا کلیک کنید .


چکیده

در این پژوهش، ریزساختار و ویژگی‌های مکانیکی در مناطق گوناگون جوشکاری اصطکاکی نقطه‌ای آلیاژ آلومنیوم-لیتیم 2A97 مطالعه شده است که تحت فرآیند عملیات حرارتی مختلف قرار گرفته است. ورثه نورد گرم شده آلیاژ 2A97 با ضخامت mm 2، با استفاده از جوشکاری اصطکاکی نقطه‌ای بهینه شده با پارامترهای جوشکاری با موفقیت جوشکاری شد. پس از آن، اتصالات 2A97 با دو روش عملیات حرارتی متوالی: حلسازی و پیرسختی، پیرسختی مستقیم آزمایش شد. ریزساختار مربوطه و ویژگی‌های مکانیکی نمونه‌های عملیات حرارتی شده با میکروسکوپ نوری (OM)، میکروسکوپ الکترونی روبشی (SEM)، میکروسکوپ الکترونی عبوری (TEM)، آزمون سختی و آزمون کشش مطالعه شدند.نتایج نشان داد که و ویژگی‌های مکانیکی اتصالات 2A97 قبل و بعد از عملیات حرارتی به طور قابل توجهی اصلاح شد که عمدتا به ساختار ریزدانه، اندازه و نوع رسوب و چگالی نابجایی بستگی دارد. در مقایسه با مواد پایه و مواد آزمایش شده با پیرسختی مستقیم، تمام اتصالات 2A97 جوش خورده بعد از حلسازی و عملیات پیرسختی ویژگی‌های مکانیکی بهتری نشان دادند.

خرید آنلاین


نظرات 0 + ارسال نظر
برای نمایش آواتار خود در این وبلاگ در سایت Gravatar.com ثبت نام کنید. (راهنما)
ایمیل شما بعد از ثبت نمایش داده نخواهد شد