دنیای جوشکاری

دنیای جوشکاری

دنیایی از مطالب جوشکاری و بازرسی فنی
دنیای جوشکاری

دنیای جوشکاری

دنیایی از مطالب جوشکاری و بازرسی فنی

دانلود پایان نامه به زبان انگلیسی: شبیه سازی جوشکاری و اتصال آلیاژهای آلومینیوم به روش آنالیز اجزای محدود

پایان نامه Welding Simulations of Aluminum Alloy Joints by Finite Element Analysis (شبیه سازی جوشکاری و اتصال آلیاژهای آلومینیوم به روش آنالیز اجزای محدود) توسط Justin D. Francis از انستیتو پلی تکنیک ویرجینیا در سال 2002 و در 241 صفحه نگارش شده است. متن زیر چکیده ای از این پایان نامه است:

Simulations of the welding process for butt and tee joints using finite element analyses are presented. The base metal is aluminum alloy 2519-T87 and the filler material is alloy 2319. The simulations are performed with the commercial software SYSWELD+®, which includes moving heat sources, material deposit, metallurgy of binary aluminum, temperature dependent material properties, metal plasticity and elasticity, transient heat transfer and mechanical analyses. One-way thermo-mechanical coupling is assumed, which means that the thermal analysis is completed first, followed by a separate mechanical analysis based on the thermal history.

The residual stress state from a three-dimensional analysis of the butt joint is compared to previously published results. For the quasi-steady state analysis the maximum residual longitudinal normal stress was within 3.6% of published data, and for a fully transient analysis this maximum stress was within 13% of the published result. The tee section requires two weld passes, and both a fully three-dimensional (3-D) and a 3-D to 2-D solid-shell finite elements model were employed. Using the quasi-steady state procedure for the tee, the maximum residual stresses were found to be 90-100% of the room-temperature yield strength. However, the longitudinal normal stress in the first weld bead was compressive, while the stress component was tensile in the second weld bead. To investigate this effect a fully transient analysis of the tee joint was attempted, but the excessive computer times prevented a resolution of the longitudinal residual stress discrepancy found in the quasi-steady state analysis. To reduce computer times for the tee, a model containing both solid and shell elements was attempted. Unfortunately, the mechanical analysis did not converge, which appears to be due to the transition elements used in this coupled solid-shell model.

Welding simulations to predict residual stress states require three-dimensional analysis in the vicinity of the joint and these analyses are computationally intensive and difficult. Although the state of the art in welding simulations using finite elements has advanced, it does not appear at this time that such simulations are effective for parametric studies, much less to include in an optimization algorithm.


download-bottom (9).gif


- به دلیل به روز بودن وبلاگ از سایر قسمت ها هم بازدید کنید.

- برای ورود به بخش آرشیو مطالب اینجا را کلیک کنید.

دانلود پایان نامه به زبان انگلیسی: تعمیر و نگهداری قطعات جوشی در محیط فضا

عنوان پایان نامه ای که در این بخش برای شما قرار داده ایم Welded Repair and Maintenance in the Space Environment (تعمیر و نگهداری قطعات جوشی در محیط فضا) می باشد که توسط جناب آقای Vasilios Nikou از آکادمی دریایی Hellenic یونان در سال 2003 میلادی تهیه شده است. در ذیل چکیده این پایان نامه که به زبان انگلیسی است را مشاهده می کنید:


The feasibility of using earth bounded welding techniques in the space environment has been investigated. A literature survey on welding in space reveals numerous aspects about the work done in different countries. The survey indicates the need of a more detailed focus, since no welding experiments have been performed in space since July 1984 (Salyut-7). Addressing the peculiarities of different welding processes, such as environmental restrictions, helped in evaluating and analyzing the selected processes. In order to study the use of a welding process, one should also analyze the ways to test the welds produced. Consequently, non-destructive testing (NDT) techniques with potential use in the space environment were evaluated. A comparison of the various NDT techniques showed parameters, which had not been previously considered, for instance materials to be welded and type of welding processes to be used. The most probable candidates for use in the space environment were ultrasonic, radiographic and eddy current techniques. Even though mathematical modeling is not the main part of the thesis, an existing model was used in order to examine the impact of gravity on defect formation, and humping in particular, in the welding pool. Different results were generated for the Earth environment as well as the simulated space environment inside a spacecraft.


download-bottom (9).gif


- به دلیل به روز بودن وبلاگ از سایر قسمت ها هم بازدید کنید.

- برای ورود به بخش آرشیو مطالب اینجا را کلیک کنید.

دانلود پروژه اسکلت پیچ و مهره

Untitled1.jpg


امروزه استفاده از سازه های پیچ و مهره ای در صنعت به نحو چشمگیری افزایش یافته به طوری که این سازه ها در گذشته فقط شامل سوله های صنعتی و مجتمع های پتروشیمی و سازه های مورد استفاده در صنایع گاز می شد. هم اکنون کاربرد این سازه ها در ساختمان های مسکونی، اداری و تجاری که در شهرها نیز ساخته می شوند با رشد چشمگیری رو به رو بوده است. از مهمترین دلایل استفاده از سازه های پیچ و مهره ای در کشورهای صنعتی عدم نیاز به جوشکار زمان نصب سازه و در موقعیت های سخت همچنین سرعت بیشتر اجرا در محل نصب نسبت به سازه های جوشی می باشد. همچنین اسکلت هایی که در محوطه پروژه های ساختمانی تولید می شوند به خاطر محدودیت در تامین برق مکفی و بکارگیری دستگاه های جوش مدرن (با نرخ نفوذ بالا و استاندارد)، عدم وجود ابزار صنعتی سنگین، تیم های مجرب رنگ آمیزی و زنگ زدایی صحیح و ... نه تنها فاقد کیفیت هستند بلکه کاملا دست و پاگیر و دارای پروسه ای زمانبر هستند که بلاشک منجر به ایجاد ترافک در معابر و مزاحم همسایگان می شود.


download-bottom (9).gif


- به دلیل به روز بودن وبلاگ از سایر قسمت ها هم بازدید کنید.

- برای ورود به بخش آرشیو مطالب اینجا را کلیک کنید.

دانلود پروژه خطرات جوشکاری

پروژه خطرات جوشکاری در سایت AFSCME Research Department به زبان انگلیسی منتشر شده است. این پروژه توسط خانم شعبانی ترجمه و توسط خانم حسنی ویرایش شده و مجددا توسط وزارت کار و امور اجتماعی به زبان فارسی انتشار یافته است.


Untitled.jpg


download-bottom (9).gif


- به دلیل به روز بودن وبلاگ از سایر قسمت ها هم بازدید کنید.

- برای ورود به بخش آرشیو مطالب اینجا را کلیک کنید.

دانلود پروژه جوشکاری پلاستیک ها

قطعات پلاستیکی را می توان به طرق مختلف بر روی هم سوار کرد. بطور کلی این روش ها در 3 گروه طبقه بندی می شوند که عبارتند از:

1- چسباندن پلاستیک ها بر روی هم

2- سوار کردن قطعات پلاستیکی به طریقه مکانیکی

3- جوشکاری و اتصال حرارتی پلاستیک ها

در جوشکاری ترموپلاستیک ها نوع جوش بکار رفته مشابه انواع آن در جوشکاری فلزات است. در جوشکاری پلاستیک ذوب شدن و جریان یافتن مذاب به داخل درز جوش عملی نشده بلکه سیم جوش یا پلاستیک جوش، نرم شده و با اعمال فشار کمی که توسط وسیله جوشکاری به آن وارد می شود این دو عامل با یکدیگر پیوند دایمی و ثابتی بوجود می آورند.


StickFan_so 01.JPG


download-bottom (9).gif


- به دلیل به روز بودن وبلاگ از سایر قسمت ها هم بازدید کنید.

- برای ورود به بخش آرشیو مطالب اینجا را کلیک کنید.