دنیای جوشکاری

دنیای جوشکاری

دنیایی از مطالب جوشکاری و بازرسی فنی
دنیای جوشکاری

دنیای جوشکاری

دنیایی از مطالب جوشکاری و بازرسی فنی

مکانیزم نفوذ فلاکس در جوشکاری تیگ برای آلیاژ آلومینیوم

Study of mechanism of activating flux increasing

weld penetration of AC A-TIG welding for aluminum alloy

مطالعه مکانیزم افزایش مکانیزم نفوذ فلاکس فعال ساز جوشکاری AC  A-TIG

برای آلیاژ آلومینیوم

ABSTRACT

When multi-component flux AF305 is used as surface activating flux for an aluminum alloy, the weld penetration of activating flux-tungsten inert-gas (A-TIG) welding is over two times more than that of conventional TIG welding. Using A-TIG welding with the modes of alternating current (AC), direct current electrode negative (DCEN) and direct current electrode positive (DCEP), respectively, the flux differently affects weld penetration when the polarity is different. After studied the effect of compelled arc constriction on weld penetration of AC welding, it is believed that the constriction of the whole arc root is not the main mechanism that flux AF305 dramatically improves weld penetration. The penetration has a relationship with the separate distribution of slag on the weld surface. Then, an observation of scanning electron microscopy (SEM) and an electronic data systems (EDS) analysis of slag were performed respectively. The separate distribution of slag on the weld pool during welding and the great constriction of arc spots were confirmed by TIG welding with helium shielding gas. The relationship between slag distribution and weld penetration was studied by adding aluminum powder into flux AF305 to change the distribution of slag. During welding, the separate distribution of slag on the weld pool results in the great constriction of arc spots, an increase in arc spot force, and an increase in Lorentz force within the arc and weld pool. Finally, the weld penetration is increased.


  

ادامه مطلب ...